Installing an Over Ground Pool for Your Home
If you want to install an over ground pool for your home, you should first prepare the ground. This will involve digging the proper size hole for the plants. Fill the hole with soil and water thoroughly. Once the hole is ready, you can plant the plants. Remember to space them well for growth and to avoid placing them too close to the structure of the pool.
Cost of installing an above-ground pool
Whether you are installing an above ground pool on your own or having a professional do it, there are some factors you should consider to determine the cost. First, you need to prepare the ground. For instance, if you have a large tree in your yard, you may need to have it removed before installing an above ground pool. This will increase the installation cost.
Next, you need to think about the size and shape of the pool. The size will depend on how big your backyard is. Also, you must check the distance from septic tanks, overhead power lines, and roads. After all, you don’t want your new pool to collide with any of those.
Choosing the right location
When choosing the right location for your over ground pool, there are several factors that need to be taken into consideration. For starters, you will need sufficient space in your backyard. You should also be aware of the distance from property lines. Some areas require a specific distance, and others do not. Additionally, you will need to take into consideration the location of utility lines and overhead power lines.
Another important factor to consider when selecting a location for your pool is the sun exposure. A pool located on a sunny area will receive the most sunlight, which helps keep the temperature appropriate. It will also allow you to swim in the water for longer periods of time. Generally speaking, you should point your pool south or west to maximize sunlight exposure.
Preparing the ground
The first step in installing an over ground pool is to prepare the ground where it will be installed. It is important that the ground is level. You do not want to install a pool on uneven ground, as this will affect the structural integrity of the pool liner. You can prepare the ground for the pool by removing any sod and raking the area. Raking is an essential part of this process because it will remove any debris, which can impact the liner. Ensure that the area is flat and level to prevent the pool from shifting.
The area must be level and free of vegetation. You can rent a sod cutter for under $100 to remove sod from all areas of the ground. To ensure that the ground is level, start by cutting off an extra foot of sod around the pool area and around the perimeter. Once you’ve done this, roll up the sod streeks so that the ground surrounding the pool area is level. Once this is done, you can use a transit level to make sure that no major areas are elevated or unlevel.
Choosing a liner
Choosing a liner for an over ground pool is an important decision. Proper fit is the key to a long lasting liner. The right fit can also save you time and money. You should know the exact dimensions of your above ground pool so you can narrow down your choices. You should also measure the inside of the wall to determine the length and width of the liner. The dimensions of a clock face style pool should be between 12 inches and six inches, whereas those of a rectangle-shaped pool should be about nine inches and 12 inches.
There are three main types of pool liners available. These are the 20-mil, the 25-mil, and the 30 mil varieties. The choice of a liner depends on the specific needs of your home and your budget. A thicker liner will last longer, but it will cost you more. The average homeowner should choose a liner that is 20 to 25 millimeters thick.
When installing an over ground pool for your home, you need to be aware of the requirements for safety. It is also important to ensure that you have the proper electrical bonding in place. The final inspection should include electrical, structural, door alarms, and safety fencing. A pool inspector will also check the base unit wiring.
A permanent perimeter fence around the pool area is a common requirement for pool safety. It must be at least five feet high and must have a self-closing gate. Other safety measures may be required by local regulations. In addition to the fence, you must install safety glass at the pool’s edge and install a stable pool cover. For extra safety, you can also install a pool alarm. The alarm will sound if anyone touches the water.